PA660 High thermal conductivity nylon suitable for high-

power LED lamp cup

Product details:

Brand/manufacturer:磐石

Brand: PA 660

Origin: zhejiang province

Type: original material

Use level: injection molding grade

Density: 1.75 g/cm3

Molding shrinkage rate: 0.2 - 0.3%

The thermal deformation temperature: 195 ℃

Melting point: 250 ℃

Flame retardant grade: UL94-V0

Heat transfer coefficient: 1.0

The surface resistance: 1.00 e+14

Product features:

Green environmental protection, comply with the UL certification; Halogen-free flame retardant, insulation, prevent electric shock and good thermal conductivity

Product performance:

Suggested molding process:

Drying temperature： 100 ℃

Drying time ：3 ~ 4 hours

Injection temperature:

Nozzle temperature ：250 ℃

A period of 280-285 ℃

Section 2：285 ℃

Three sections of 270 ℃

Mold temperature:  85 ~ 90 ℃

Injection pressure: 80 mpa

Note:

Please seal storage and placed in ventilated, dry place, prevent be affected with damp be affected with damp, if be affected with damp be affected with damp, please dry again after use, so as not to affect performance.

Packing:

Moisture-proof packaging, 25 kg/bag.